C36

Signal Accessory

Abstract: Integrated signal accessory controller.

Imbedded Signal Controller driving up to

Specs

Accessory controller for integration into the signals. This circuit board is very small and is intended for use where there is very little space available. Otherwise, using the C23 would be recommended.

Features,

  • EDG interface (TTL /w signal reshaping)
    • 6 pin FFC cable connector
    • Connects to adapter module P18
  • 1 output port on the PCB
    • Drives independent LEDs (= 12 LEDs max)
    • solder pads
    • PCB for imbedding (PCB size 18 x 6mm)
    • Software adjustable LED voltage (1.8 – 5V)
    • PWM for soft LED on/off
    • Gamma correction
  • firmware update over the bus

Note 1: This module functionality is equivalent to the signal controller C23.
Note 2: This module connects to the P18 adapter via a FFC cable.
Note 3: This PCB is identical to the E11 but running different software (ROM, Bootloader & Main).

Model railway imbedded signal accessory controller.

Example

The C36 connects to the EDG bus via the P18 adapter and shares common EDG bus functions such as firmware updates over the bus.
Imbedded controller for standard and multiplex signals.

Installing the embedded accessory controller inside or near the signal mounting socket. The P18 adapter converts an FFC cable into a standard EDG bus cable connection.

Gallery

GitHub
Signals